This article mainly talks about designs to reduce the cost of plastic parts.
READ MORE
The transparent surface of the product gives people a light and transparent psychological feeling, evoking the desire for "light life". The unique warm touch of wood is reassuring and brings a feeling of returning to nature. The combination of transparent and wooden materials can create a sense of t
READ MORE
I, The technical requirements of outline of part 1, The standard tolerance of outline not noted in the drawing should be in accordance with the requirements of GB1184-80 guidelines.2, The standard tolerance size of length not noted should be within ± 0.5 mm.3, The radius of Corners not noted can be
READ MORE
In today's increasingly competitive market, the appearance of the product has become one of the important factors to attract consumers to buy the product. Due to the plastic material itself and the characteristics of the injection process, plastic parts are easy to produce shrinkage, bubbles, fusion
READ MORE
The strength of plastic parts is always a subject of concern for mechanical engineers. Compared with metal parts, the strength of plastic parts is generally low, but through reasonable part design, the strength of plastic parts can be increased significantly, which can expand the range of applicatio
READ MORE
This article talks about a guide on how to design holes of plastic products.
READ MORE
In order to ensure the strength and rigidity of the plastic part and not to cause the wall thickness of the plastic part to be too thick, the reinforcing rib can be set at the appropriate part of the plastic part to avoid the deformation of the plastic part.
READ MORE
There is no specific standard for the draft angle, and most of them are determined by experience. Usually, any sidewall of the molded product has a draft angle so that the product can be taken out of the mold.
READ MORE
1. The role of wall thickness(1) Make the product have a definite structure and certain strength and rigidity to meet the use requirements of the product.(2) It has a good flow state (such as the wall cannot be too thin) and filling and cooling effects (such as the wall cannot be too thick) during m
READ MORE
This article discusses design rules and the best materials to use when producing 3D printed hinges.
READ MORE